How should the stretching process be controlled when producing BOPP film using the flat-film method?

① The preheating roller temperature for longitudinal stretching is 150–155°C, and the stretching temperature is 155–160°C;
② The longitudinal stretching ratio should depend on the thickness of the film. Generally, the longitudinal stretching ratio is appropriately increased as the thickness of the original sheet increases, but if the stretching ratio is too high, the film is prone to tearing. Typically, the longitudinal stretching ratio is 5× when the film thickness is 0.6 mm, and 6× when the film thickness is 1 mm;
③ During transverse stretching, the temperature of the preheating zone is controlled at 165–170°C, the stretching zone at 160–165°C, and the heat-setting zone at 160–165°C;
④ The transverse stretching ratio is generally 5–6×.
Top
Inquiry
Inquiry