News

  • Super Hard High-vanadium Ω102A and its R&D Ten years ago, our company has researched and developed high-chromium iron Ω101A, which is similar...
  • Different surface treatments for screw element There are different surface treatments for screw element. 1. Tungsten cobalt alloy powder. Processed by special hardening technology, suitable for processing a variety of transparent products, precision products and fiber, magnetic...
  • Different kinds of plastic extruder cylinders With the extensive application and development of plastic extruder cylinder, the types of plastic extruder cylinders are increasing. According to the screw speed, there are ordinary extruder cylinder, high speed and super speed extruder cylinder....
  • How to choose good quality segment screw element Double screw extruder has good plasticizing performance and stable extrusion and other advantages. The surface of segment screw element is usually sprayed with double alloy, which can effectively extend the service life of the screw. Here today,...
  • Top 10 Professional Screw Element Manufacturers Here today we will share top 10 professional Screw Element manufacturers with you.  1. extricom.de  Screw elements irrespective of OEM. The fundamental element of the co-rotating twin screw extruder is the tightly...
  • Influence of unstable extruder cylinder on quality There are several reasons that affect the speed of extruder cylinder.  1. The transmission belt may be worn seriously, resulting sipping while working.  2. The distance between belt rolls is too small so that...
  • Information of model ZLYJ gearbox for single screw extruder 1.      Overview:    Series model ZLYJ gearbox(Speed Reducer) is a transmission specially designed for a single screw extruder, in which there are high precision hardend gears and thrust block. It...
  • Methods to restore worn screw of extruder cylinder Here are some methods to restore worn screw of extruder cylinder. If the screw of extruder cylinder become smaller due to wear, the surface should be cleaned smoothly first. And then spray wear-resistant alloy to the worn parts....
  • Shanghai Omega offer bimetallic barrel with special alloy layer A bimetallic barrel is made by centrifugal casting way generally, its hypostasis is under a centrifugal force, the alloy with lower melting point to be a liquefaction first, and bonding on the barrel bore surface, both material metallogaphical...
Displaying 55 to 63 (of 118 news)
Top
Inquiry
Inquiry