News

  • Larger Length-Diameter Ratio Barrel & Screw Wear Characteristic Because the extruder function is completely different from the injection machine, the extruder barrel & screw length is generally longer the injection machine. This working length is often compared with the diameter, that is, the length to...
  • Compare with Extruder Core Parts Suppliers in China Item Compared         Omega Group Other Suppliers in China The Creator of Bimetallic...
  • Technical Step for Repairing Worn Barrel with A Liner 1. Fabricate a piece of blind patch, the shape is the same as the original feeding hole of the barrel. Plug the feeding hole with this blind patch. Please note that the intrados of the blind patch should be conformed to the intrados of the barrel;...
  • Technical Data of Through Hardened Screw Type of through hardened screw Base material of screw Alloy Layer Thickness of Alloy Layer Hardness of Alloy...
  • How to make a Longer Bimetallic Twin Barrel Q: I was under the impression that the 2C halves are made from the Omega 301 alloy using the PM-HIP technology? A. No, this 301 alloy layer is only got by a normal bimetallic technology way, like all the bimetallic barrel, this time is...
  • Discussion for hardness and abrasion principle of Omega301 Alloy As we all know, when some kinds of plastic are running inside an extruder and an injection machine, there is a friction between barrel and screw, and a cut force between plastic and machine parts. Also there is a case that these machine parts are...
  • What is the screw OD65 wear characteristic and counter measure? Base on the data information screw OD65, its L/D ratio reach 37.17, which is very rare seen. With this kind of L/D ratio, when the screw running, the screw flight outer diameter at the metering zone will create a heavy adhesive wear which is...
  • The information about our Omega 301 alloy Our Omega 301 alloy integrates high wear-resistance of Omega 101 alloy with high corrosion-resistance of Omega 201 due to average dispersedness of tungsten carbide grain in a hard and corrosion-resistant Ni-based alloy. As per this property, our...
  • Analysis of Abrasion Mechanism for an Extruder Cylinder & Screw 1. Generally say, how many abrasion categories of mechanical components could be divided into?  Generally say, abrasion of mechanical components could be mainly divided into four kinds in theory: Adhesive wear, Abrasion wear,...
Displaying 163 to 171 (of 194 news)
Top
Inquiry
Inquiry