Copyright © Shanghai Omega Machinery Co., Ltd. All rights reserved.
News
- Alloy Layer Questions and Information for Bimetallic Screw Questions 1: Oxy-Acetylene Process for application of hardfacing powder: Are you referring to the spray and fuse method for hardfacing the feed screws that were recently shipped to us? The hardfacing alloy is in powder form. Usually the...
- We Researched Bimetallic Barrel & Bimetallic Screw in China 1.Research Background of Bimetallic Barrel & Bimetallic Screw As a very important replace materials, plastic and rubber are used more and more. Therefore, various modified plastic---rubber are used widespread. For instance, some...
- Learn more about bimetallic barrel How is bimetallic barrel manufactured? A bimetallic barrel begin with a steel tube. The tube is filled with a powdered metal and closed at the ends. And then it will be heated in a furnace which is at a high temperature. The powdered metal will be...
- Advantages of bimetallic barrel There are many advantages of bimetallic barrel as it helps to improve wear life and increases the process performance incredibly. It gives strength resistance to fatigue. Bimetal development provides a protective layer fused with powerful...
- Contact Wear Examining Results of Five Ferroalloy for Oval Liner Examining Item Unit ...
- Two Standard Gaps of a Co-rotating Twin Screw Extruder A. Standard Gaps for Co-rotating Twin Screw Extruder Gap Type Degree Formula Manufacturers & Series...
- Twin Extruder Core Segment Components Recommended Material Form 1.Major Chemical and Hardness Comparison Table of Recommended Material of an Oval Liner for Corrosion Resistance Alloy Name Material Type...
- Segment Core Components Recommended Material for Twin Extruder 1.Major Chemical and Hardness Comparison Table of Recommended Material for Oval Liner Alloy Name Material Type Fe...
- Quality Comparison Table of Segment Screw & Kneading Disk Comparison Item Shanghai Omega Generic Manufacturer in China Material...
- Information
- How should the JPX65 parallel twin-screw extruder be operated for a no-load test run?
- Why does the parison slow down when passing through the shaping die during extrusion? How can this problem be solved?
- Why do large dull and lusterless bubbles appear on the surface of the profile? How can this problem be solved?
- What are the differences in process control when co-extruding PVC/PMMA and PVC/ASA profile materials?
- How should an extruder be selected when extruding sheet (plate) materials?
- During the production of cross-linked polyethylene cables, early cross-linking often occurs. What causes this phenomenon and how can it be solved?
- What are the reasons for the bending and deformation of extruded plates? How can they be solved?
- What are the causes and solutions for uneven edges when extruding sheet materials?
- How to solve the problem of stripes appearing on the surface when producing ABS composite boards?
- What causes the appearance of pits and bubbles on the surface of ABS/PMMA co-extruded composite sheets? How can it be solved?
- Contact Us
-
Shanghai Omega Machinery Co., Ltd.
Add.: No.168 Hualian Road, Putuo District, Shanghai City
Contact: Nina
Tel.: +86-021-69921527
Mobile: +86-15021464410
Fax: +86-021-69921567
E-mail: omegajessica@163.com;965425705@qq.com
WeChat No.: 1131449532
Whatsapp: +86 159 0054 6558
-