Copyright © Shanghai Omega Machinery Co., Ltd. All rights reserved.
News
- Quality Comparison Table of an Oval Liner in China Remark： 1) All the data above based on supplied report by some OEM companies and end user all over the world specialize in making Co-rotating Twin-screw Extruder； 2) We are now researching a superhard high-vanadium...
- To Discuss Extruder Lifespan in Wood-plastic Composite Making Some PE wood-plastic Composites corporations, which are making floor/stand column/wall board/ keel /flower box board/chair building decoration materials email and ask us if there are any cost-effective solutions to be chosen for the short...
- Discussion with a Customer of the Extruder Screen Changer One of our overseas customer ask us a question about the extruder screen changer as below: Customer´s Question: We have one 60 extruder, it is used for the extrusion of PP-R composite pipe, the maximum output...
- Larger Length-Diameter Ratio Barrel & Screw Wear Characteristic Because the extruder function is completely different from the injection machine, the extruder barrel & screw length is generally longer the injection machine. This working length is often compared with the diameter, that is, the length to...
- Compare with Extruder Core Parts Suppliers in China Item Compared Omega Group Other Suppliers in China The Creator of Bimetallic...
- Technical Step for Repairing Worn Barrel with A Liner 1. Fabricate a piece of blind patch, the shape is the same as the original feeding hole of the barrel. Plug the feeding hole with this blind patch. Please note that the intrados of the blind patch should be conformed to the intrados of the barrel;...
- Technical Data of Through Hardened Screw Type of through hardened screw Base material of screw Alloy Layer Thickness of Alloy Layer Hardness of Alloy...
- How to make a Longer Bimetallic Twin Barrel Q: I was under the impression that the 2C halves are made from the Omega 301 alloy using the PM-HIP technology? A. No, this 301 alloy layer is only got by a normal bimetallic technology way, like all the bimetallic barrel, this time is...
- Discussion for hardness and abrasion principle of Omega301 Alloy As we all know, when some kinds of plastic are running inside an extruder and an injection machine, there is a friction between barrel and screw, and a cut force between plastic and machine parts. Also there is a case that these machine parts are...
- Information
- How should a worn barrel be repaired?
- How should the counter-rotating twin-screw extruder be operated during no-load testing?
- How can internal stress concentration in profile cross-section design be minimized as much as possible?
- How can internal stress concentration in profile cross-section design be minimized as much as possible?
- What are the requirements for molding equipment and process control when producing APET sheet?
- How to enhance the low-temperature impact resistance and aging resistance of PP pipe materials?
- What causes plastic-steel profiles to bend, and how can this issue be resolved?
- What are the functions of a three-roll calender? How should the process be controlled during extruded board production?
- How should the forming process of HDPE double-wall corrugated pipe be controlled?
- Why does uneven cooling occur during the profile extrusion process?
- Contact Us
-
Shanghai Omega Machinery Co., Ltd.
Add.: No.168 Hualian Road, Putuo District, Shanghai City
Contact: Nina
Tel.: +86-021-69921527
Mobile: +86-15021464410
Fax: +86-021-69921567
E-mail: omegajessica@163.com;965425705@qq.com
WeChat No.: 1131449532
Whatsapp: +86 159 0054 6558
-