Copyright © Shanghai Omega Machinery Co., Ltd. All rights reserved. Seo by Onepound
News
- Typical Alloy Layer Name of Bimetallic Barrel & Bimetallic Screw A. For a Bimetallic Barrel: Manufactory Alloy name for wear resistance Alloy name for corrosion resistance Alloy name for...
- Alloy Layer Questions and Information for Bimetallic Screw Questions 1: Oxy-Acetylene Process for application of hardfacing powder: Are you referring to the spray and fuse method for hardfacing the feed screws that were recently shipped to us? The hardfacing alloy is in powder form. Usually the...
- We Researched Bimetallic Barrel & Bimetallic Screw in China 1.Research Background of Bimetallic Barrel & Bimetallic Screw As a very important replace materials, plastic and rubber are used more and more. Therefore, various modified plastic---rubber are used widespread. For instance, some...
- Learn more about bimetallic barrel How is bimetallic barrel manufactured? A bimetallic barrel begin with a steel tube. The tube is filled with a powdered metal and closed at the ends. And then it will be heated in a furnace which is at a high temperature. The powdered metal will be...
- Advantages of bimetallic barrel There are many advantages of bimetallic barrel as it helps to improve wear life and increases the process performance incredibly. It gives strength resistance to fatigue. Bimetal development provides a protective layer fused with powerful...
- Contact Wear Examining Results of Five Ferroalloy for Oval Liner Examining Item Unit ...
- Two Standard Gaps of a Co-rotating Twin Screw Extruder A. Standard Gaps for Co-rotating Twin Screw Extruder Gap Type Degree Formula Manufacturers & Series...
- Twin Extruder Core Segment Components Recommended Material Form 1.Major Chemical and Hardness Comparison Table of Recommended Material of an Oval Liner for Corrosion Resistance Alloy Name Material Type...
- Segment Core Components Recommended Material for Twin Extruder 1.Major Chemical and Hardness Comparison Table of Recommended Material for Oval Liner Alloy Name Material Type Fe...
- Information
- How should the extrusion blow molding process for HDPE barrels be controlled?
- Why does the profile exhibit poor sliding performance within the forming die? What are the common manifestations of poor sliding?
- How should the raw materials be selected in the formula for PVC surface skin core layer microcellular foamed extruded profiles?
- What are the main reasons for the excessive density of surface skinning core layer microfoamed profiles? How to solve it?
- What are the key points of process control in the extrusion molding of PE sheet (plate) materials?
- Why does poor sliding occur in profiles within the shaping die? What are the common manifestations of poor slip?
- What are the different types of structure for the flow channels of co-extrusion die heads? And what are their respective applications?
- What are the causes and solutions for the lifting and cracking of the co-extruded layer of core-layer foamed profiles?
- What is the surface skin-core foaming extrusion process like? What are the requirements for the equipment and molds?
- Why does the profile break off when pulled apart in the forming die? How should it be solved?
- Contact Us
-
Shanghai Omega Machinery Co., Ltd.
Add.: No.168 Hualian Road, Putuo District, Shanghai City
Contact: Williams Wu
Tel.: +86-021-69921527
Mobile: +86-18616920618
Fax: +86-021-69921567
E-mail: alphawu@126.com;965425705@qq.com
WeChat No.: wxsyyk1203will
-